Window switch problem...?
#1
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Mar 2007
Location: Knob Noster, MO
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
Window switch problem...?
My passenger rear window switch is messed up, I can only roll it down from the drivers door and can only roll it up from the rear door. I have changed the master window switch and the door switch. What other options do I have?
#3
Senior Member
True Car Nut
Join Date: Jan 2006
Location: NEBF:06,07 | NYBF:06,07 | ONBF:06,07 | CNBF:06 & more............
Posts: 8,029
Likes: 0
Received 0 Likes
on
0 Posts
clean the contacts on the Drivers switch and the Other one Very well and put some Dielectric grease on them. i had to do that with mine.
also look inside the switch i bet there is some corrosion in there. i used a Very! small flat blade screw drive to fit in there and scrape them up.
also look inside the switch i bet there is some corrosion in there. i used a Very! small flat blade screw drive to fit in there and scrape them up.
#5
Senior Member
True Car Nut
Join Date: Jan 2006
Location: NEBF:06,07 | NYBF:06,07 | ONBF:06,07 | CNBF:06 & more............
Posts: 8,029
Likes: 0
Received 0 Likes
on
0 Posts
mine was doing a similar thing. the drivers side window would not work but the pass-rear one would. then they both stopped working.
I have a problem with both switches and the plug on the motor. cleaned everything up and problem fixed.
I have a problem with both switches and the plug on the motor. cleaned everything up and problem fixed.
Thread
Thread Starter
Forum
Replies
Last Post
STROKER
Classics (Star Chief and 1957 to 1986)
4
06-17-2006 10:02 AM
HDvorider2001
Everything Electrical & Electronic
4
01-20-2004 01:10 AM