When you open the glove box look behind the trunk release button and you should see the Connector for the Keyless entry system attached to the rear of the glove box..
I have just used a flathead screwdriver and grounded the terminals together, let the locks cycle, then press any button on the first remote, let the locks cycle letting you know the remote has been learned, if you have a second, press any button on that remote, allow the locks to cycle then remove the grounding tool( flathead ) and both remotes should be learned...
If you are doing a single remote, once the locks have cycled letting you know the remote is learned remove the grounding tool..
Hope that helps
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote