Question
#1
Senior Member
Certified GM nut
Thread Starter
Join Date: Jun 2004
Location: Grand Haven, Michigan
Posts: 1,719
Likes: 0
Received 0 Likes
on
0 Posts
Question
Well, for some time now, since i bought the car. The little LEDs that let me know if the car is in performance shift or normal shift haven't been working. Is it the LEDs? It is hard to tell if there is any differance between pushing the two buttons. How, do i take this panel off to either change the LEDs or take a look to see if everything is working?
#6
Senior Member
Certified GM nut
Thread Starter
Join Date: Jun 2004
Location: Grand Haven, Michigan
Posts: 1,719
Likes: 0
Received 0 Likes
on
0 Posts
Well, I went out and did some WOT'* to tell if they shift at different RPM'*. The performance shifts at a little higher of an RPM than the normal mode. So, I guess that the light that is behind the button that tells what mode it is in (not the red light that lights up the name) is out. So, how do i go about changing this and what is the number of the bulb i have to replace?
#7
Senior Member
True Car Nut
Join Date: Apr 2004
Location: Three Oaks, Michigan
Posts: 4,879
Likes: 0
Received 0 Likes
on
0 Posts
Like every back light for our cars.. a 192 bulb. Unless.. this isn't the backlighting, but something else, it'* probably just a generic LED. If it'* the LED that is burned out, you will need to do some soldering.. most likely. I don't have this performance **** whatnot.. so I can't help much more.
-justin
-justin
#8
Senior Member
Certified GM nut
Join Date: Feb 2004
Location: MI
Posts: 2,246
Likes: 0
Received 0 Likes
on
0 Posts
I think this thread is talking about similar stuff as you. Has some pics on what you will encounter.
http://www.bonnevilleclub.com/forum/...ic.php?t=27604
http://www.bonnevilleclub.com/forum/...ic.php?t=27604
#10
Senior Member
Certified GM nut
Thread Starter
Join Date: Jun 2004
Location: Grand Haven, Michigan
Posts: 1,719
Likes: 0
Received 0 Likes
on
0 Posts
Alright, how do I get that whole thing off of there with the performance shift and normal shift buttons on it? I want to look at the wiring on there, and that is also where I want to put my switch for my angel eyes.