As much info for next to shifter buttons as you can muster
#1
Senior Member
Certified Car Nut
Thread Starter
As much info for next to shifter buttons as you can muster
Like the title says, i have a 3 button, and 5 button piece from an SSE or SSEi, and am looking for all the information any gearheads or anyone, has on them. How the work, whats the hookups etc.
Thanks!
Thanks!
#3
Senior Member
Certified Car Nut
Thread Starter
the one from a 92-99 bonneville. It'* the 5 and 3 button one. I can get pix if need be.
I'm looking for their harness diagrams, what goes into what, what switches what. Which connectors are for which buttons.
What'* momentary, what'* on/off.
I'm looking for their harness diagrams, what goes into what, what switches what. Which connectors are for which buttons.
What'* momentary, what'* on/off.
#5
Junior Member
Posts like a Ricer Type-R
Fud, he should have the standard 3 button with performanc/normal shift and traction. The 5 switch pod should add performance/touring ride. He'* trying to figure out if the switches are momentary, push-on/push-off or what wires go to each set of contacts.
#6
There are two varieties of three button switches. Some have the performance/touring suspension and some have the performance/normal shift.
So I'll leave that one alone for now. It should be included in the 5-button anyway.
The performance/touring suspension (SPDT switch):
Light green - Touring pole on the switch
Brown/white - Performance pole on the switch
Dark Green - Performance LED
Pink - Touring LED
Performance/Normal shift (DPDT switch):
Black No. 1 - Input to common pole 1 on switch (returns thru 348 ohm resistor and light blue wire OR nothing)
Black No. 2 - Input to common pole 2 on switch and illumination bulb (returns thru performance LED OR touring LED, common 470 ohm resistor and brown wire)
Light Blue - 348 ohm resistor in performance selected mode
Brown - Through 470 ohm resistor to both LEDs
Traction control switch (SPST momentary, normally open):
Gray - Through diode to illumination bulb
Purple/White - To traction on LED
Brown/White - To switch
Shared:
Black/White - To traction control switch AND traction LED through 470 ohm resistor AND to Touring/Performance LEDs AND common pole on the Touring/performance switch.
Good luck!
So I'll leave that one alone for now. It should be included in the 5-button anyway.
The performance/touring suspension (SPDT switch):
Light green - Touring pole on the switch
Brown/white - Performance pole on the switch
Dark Green - Performance LED
Pink - Touring LED
Performance/Normal shift (DPDT switch):
Black No. 1 - Input to common pole 1 on switch (returns thru 348 ohm resistor and light blue wire OR nothing)
Black No. 2 - Input to common pole 2 on switch and illumination bulb (returns thru performance LED OR touring LED, common 470 ohm resistor and brown wire)
Light Blue - 348 ohm resistor in performance selected mode
Brown - Through 470 ohm resistor to both LEDs
Traction control switch (SPST momentary, normally open):
Gray - Through diode to illumination bulb
Purple/White - To traction on LED
Brown/White - To switch
Shared:
Black/White - To traction control switch AND traction LED through 470 ohm resistor AND to Touring/Performance LEDs AND common pole on the Touring/performance switch.
Good luck!
#7
Senior Member
Certified Car Nut
Thread Starter
Could someone open up their console and snap a pic of the harnessess? I don't have one, so i don't know what wires are what. And i bet my chilton wiring diagrams don't have them either....