got scan tool, still cant get codes need help
#1
Senior Member
Posts like a Corvette
Thread Starter
got scan tool, still cant get codes need help
well i got my new scan tool today and it does the same thing the old one does, which makes me wonder if the pcm is going bad, which could explain why the car has been acting weird, any help on this would be appriciated. i have also noticed that the wires to terminals f and h are missing, i am using this as a reference: http://autorepair.about.com/library/...l-dtcs-36a.htm
#2
Junior Member
Posts like a Ricer Type-R
I just talked with him on YM. He'* checking for ground on Pin B, and tracing all the wires from the connector as far back as he can. I suspect a broken wire between the connector and the PCM, or perhaps a PCM as he mentioned.
Can the gearheads give us wire colors and destinations for the pinout on the connector?
Can the gearheads give us wire colors and destinations for the pinout on the connector?
#3
Senior Member
Posts like a Corvette
Thread Starter
im picking up a multimeter tomorow on my way to work, but this is probly the pcm, there are more and more symptoms adding up that are pointing to my pcm, such as my gauges randomly not working, having no ses soon light working, the car is running rough and now i cant read codes, in case this is the pcm can anyone sugguest a good place to get an aftermarket pcm
#4
Senior Member
Posts like a Corvette
Thread Starter
ok i got the tool working but the gm cartridge is faulty as far as the terminal goes, ill wait till it get my new cartridge to see if i still have a problem or not
#5
Junior Member
Posts like a Ricer Type-R
Help me out here....how do you know if the scantool is good, and the cartridge is bad? What'* it doing? I'd like to know if this ever happens to me. You got the Actron, right?
Thread
Thread Starter
Forum
Replies
Last Post