Trouble shooting with radio and lights
#1
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Mar 2004
Posts: 229
Likes: 0
Received 0 Likes
on
0 Posts
Trouble shooting with radio and lights
Alright, I already posted one topic about how to install the radio if all the wires were cut. If anyone here knows how that would be helpful too. But my main thing now is how to get all the lights inside the car to work. The power mirrors won't work. Also, none of the interior lights come on when the doors are opened. What should I do?
#2
Senior Member
True Car Nut
Join Date: Apr 2004
Location: Three Oaks, Michigan
Posts: 4,879
Likes: 0
Received 0 Likes
on
0 Posts
make sure the little sensors move, but most likely it will be a blown fuse, if the mirrors don't work, the locks don't work, and the lights don't work its fuse 15 [20amp]. at least that is the way it is on my '89.
A way to reinstall a radio with all cut wires is to try to match up the colors [if this applies to you] from the wires, to the connector[*] if there arn't any connectors or wire color[*] left on the connector then I can't help ya there.
-justin
A way to reinstall a radio with all cut wires is to try to match up the colors [if this applies to you] from the wires, to the connector[*] if there arn't any connectors or wire color[*] left on the connector then I can't help ya there.
-justin
Thread
Thread Starter
Forum
Replies
Last Post
Danthurs
Trouble shooting + Test Procedures
0
10-01-2009 09:58 AM