i got a waeco mt2000 Comfort Turn Signal Module.
This one let light up the turn signals for a additional 2-3 times after the turn signal switch was hit for a short time.
this is here in germany in all new cars standard equipment know to be law confirm because it'* law in germany to flash at least 2 times if you change the lane aso....
however, i want to istall this box into my Bonneville BUT there is a big problem.
the both rear turn signal lamps (wire colors: yellow and dark green) are bricked in the Turn Signal switch as long as the switch is in the off position.
so if i give +12V on one of the wires both rear turn signals light up.
on the front everything would work fine, but i don't know how i can bypass this problem.
I hope you guys have an idea.
Thanks for any input.