auto p/window control
#12
Senior Member
Posts like a Camaro
Thread Starter
Join Date: Oct 2003
Location: Hamilton, Ontario
Posts: 1,074
Likes: 0
Received 0 Likes
on
0 Posts
OK I just opened up my driver door panel. There is no module. At least I couldn't find one. All there is is a bunch of wires (15 or so) that run out of the door and under the dash. Where is this module? Maybe the older cars don't have the same setup.
#13
Senior Member
True Car Nut
Join Date: Nov 2002
Location: Texarkana, Texas
Posts: 6,042
Likes: 0
Received 0 Likes
on
0 Posts
Follow the window motor wires to the module, It'* got to be there, Putting it anywhere else means using extra wire. Gm doesn't like to use extra wire as it costs more.
#14
Senior Member
Posts like a Camaro
Thread Starter
Join Date: Oct 2003
Location: Hamilton, Ontario
Posts: 1,074
Likes: 0
Received 0 Likes
on
0 Posts
Do I have to take the whole door panel off? In the car im taking apart theres bolts and extra stuff holding it on the the previous owner screwed in, and theyre all stripped off:(
#15
Senior Member
Posts like a Camaro
Thread Starter
Join Date: Oct 2003
Location: Hamilton, Ontario
Posts: 1,074
Likes: 0
Received 0 Likes
on
0 Posts
I just went out and tookt he door apart, there was one screw holding it and when I took it out the whole panel just fell off So there is no module and where in the door. But there are two wires that were cut, the BLUE and BROWN going to the window switch. Also the drivers window button had tape over it to prevent anyone from trying to use it. SO if there is a module, it may have been removed. Can I get one at a wreckers easily?
#18
Senior Member
True Car Nut
Join Date: Nov 2002
Location: Texarkana, Texas
Posts: 6,042
Likes: 0
Received 0 Likes
on
0 Posts
It'* seriously cool tapping both buttons, then my passenger notices that I'm turning the wheel and not still holding the buttons. Gets alot of "**** that'* cool" remarks.
Thread
Thread Starter
Forum
Replies
Last Post