Air Conditioning
08-30-2006, 09:02 PM
#1
Junior Member
Thread Starter
Join Date: May 2004
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Air Conditioning
So, today I was messing with the harness under the passenger side dash trying to get my trunk popper to work. I got that fixed, but now i notice that my air conditioner is not blowing out cold air. Is it possible that I may have bumped a wire in that same harness that would have caused this? Thanks for your help!
Edit: I have a 1992 Bonneville SE
Edit: I have a 1992 Bonneville SE
08-30-2006, 09:54 PM
#2
Senior Member
Posts like a Northstar
It'* possible.
Verify that the compressor clutch is engaged and is turning the center part of the hub when the air conditioning is turned on. Do you hear a click when you engage the A/C settings?
When you say it'* not blowing cold air, do you hear the fan running and air blowing somewhere but it'* just not coming out the vents? If so, is it coming out the defroster? That would indicate a vacuum line pulled off under the dash or under the engine compartment.
Verify that the compressor clutch is engaged and is turning the center part of the hub when the air conditioning is turned on. Do you hear a click when you engage the A/C settings?
When you say it'* not blowing cold air, do you hear the fan running and air blowing somewhere but it'* just not coming out the vents? If so, is it coming out the defroster? That would indicate a vacuum line pulled off under the dash or under the engine compartment.
Thread
Thread Starter
Forum
Replies
Last Post
