Service Stability System WSS problem
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Aug 2006
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
Service Stability System WSS problem
Hey everyone. My service stability system light came on and my abs, brake and trac off lights are on. I'm pretty sure its one of my WSS'*. had anyone diagnosed or knows how to diagnose which wss it is? And, has anyone ever replaced the sensor? I know the fronts require you to replace the entire hub. Anyone have details on what that entails? Thanks very much!
#3
Member
Posts like a V-Tak
Thread Starter
Join Date: Aug 2006
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
im assuming its one of the wss'* cause the steering wheel position sensor wouldnt disable the abs or the traction control, anyone replaced the sensors before?
#4
RIP
True Car Nut
The wheel speed sensors are built into the wheel hubs, which are not inexpensive. So, you'll want to know which of the 4 is bad, rather than just replacing without knowing. A scan is the only way to know for sure. This is a link that will take you to a how to on a Grand Prix, but the procedure is basically the same.
http://www.bonnevilleclub.com/forum/...ight=wheel+hub
http://www.bonnevilleclub.com/forum/...ight=wheel+hub
Thread
Thread Starter
Forum
Replies
Last Post