Seat wiring schematic
#1
Senior Member
True Car Nut
Thread Starter
Seat wiring schematic
Lookin to see if anyone can scan the seat wiring and where the motor wiring is for the seat motors for a 97 SSEI ( center console controlled ) from a FSM
Long story short.. I have to move the seats in order to get to the 4 bolts thats holding the entire seat down, no way I can get power thru the car ( its the parts car and I"d have to rewire that whole entire big connector in the passenger side firewall )
So I"d like to know which wire I would have to jump manually to command the motor to move the seat forward and reverse ( bypassing the relays and such )
Or just schematic and I can go from there.
Long story short.. I have to move the seats in order to get to the 4 bolts thats holding the entire seat down, no way I can get power thru the car ( its the parts car and I"d have to rewire that whole entire big connector in the passenger side firewall )
So I"d like to know which wire I would have to jump manually to command the motor to move the seat forward and reverse ( bypassing the relays and such )
Or just schematic and I can go from there.
#2
Senior Member
True Car Nut
Join Date: Jan 2005
Location: Montevideo, MN MWBF '05, '06, '07 WCBF '06 '07 survivor
Posts: 3,882
Likes: 0
Received 0 Likes
on
0 Posts
tan and light green are the 2 wires that control forward and backward. put 12v on one or the other, not both at the same time
#4
Senior Member
True Car Nut
Join Date: Jan 2005
Location: Montevideo, MN MWBF '05, '06, '07 WCBF '06 '07 survivor
Posts: 3,882
Likes: 0
Received 0 Likes
on
0 Posts
tan and light green to ground. al7'* are different. either wire to ground goes back and forth. seat selector switch is still in play as long as it has a ground. seat control module has to have power, it is the orange wire.
#5
Senior Member
True Car Nut
Join Date: Jan 2005
Location: Montevideo, MN MWBF '05, '06, '07 WCBF '06 '07 survivor
Posts: 3,882
Likes: 0
Received 0 Likes
on
0 Posts
the damn seats take 4 schematics
the previous was just to activate
the lh horiz motor is light green to 12v and dk green to ground
the rh horiz motor is, the same as the left
then there is the switching circuit.
damn it, if you just put 12v to the orange wire, all the switches should work if everything is grounded.
the previous was just to activate
the lh horiz motor is light green to 12v and dk green to ground
the rh horiz motor is, the same as the left
then there is the switching circuit.
damn it, if you just put 12v to the orange wire, all the switches should work if everything is grounded.
#6
Senior Member
True Car Nut
Thread Starter
Wow.. thanx for the info.. but now I"m totally confused.. lmao..
lmao.. are those wires situated in the console or under the seat?
lmao.. are those wires situated in the console or under the seat?
#7
Senior Member
True Car Nut
Join Date: Jan 2005
Location: Montevideo, MN MWBF '05, '06, '07 WCBF '06 '07 survivor
Posts: 3,882
Likes: 0
Received 0 Likes
on
0 Posts
the seat control module is under the left front seat. Put the orange wire to ground, it'* on a 10 pin connector
#8
Senior Member
True Car Nut
Thread Starter
Originally Posted by sonoma_zr2
the seat control module is under the left front seat. Put the orange wire to ground, it'* on a 10 pin connector
#10
Senior Member
True Car Nut
Join Date: Jan 2005
Location: Montevideo, MN MWBF '05, '06, '07 WCBF '06 '07 survivor
Posts: 3,882
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Drifter420
Originally Posted by sonoma_zr2
the seat control module is under the left front seat. Put the orange wire to ground, it'* on a 10 pin connector