window molding ?
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Mar 2004
Location: grand rapids MI.
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
window molding ?
anyone have the part number for the molding that goes around the windows on the doors and also the outside window guides mine are faded and cracked and very unsightly to look at and also cuts your arm if you happen to have the window down and your arm out of it.
#2
Senior Member
Certified GM nut
Join Date: Jun 2004
Posts: 1,933
Likes: 0
Received 0 Likes
on
0 Posts
Here'* my thread on this....
http://www.bonnevilleclub.com/forum/...068&highlight=
The sills are about $100 a side....
http://www.bonnevilleclub.com/forum/...068&highlight=
The sills are about $100 a side....
#3
Junior Member
Posts like a Ricer Type-R
Join Date: Dec 2007
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 95seand78z28
Here'* my thread on this....
http://www.bonnevilleclub.com/forum/...068&highlight=
The sills are about $100 a side....
http://www.bonnevilleclub.com/forum/...068&highlight=
The sills are about $100 a side....
Shane
#4
Senior Member
Certified GM nut
Join Date: Jun 2004
Posts: 1,933
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by shanerdaner
Can you get them from a junk yard? Just curious if they r hard to get off and put on...TIA!
Shane
Shane
The best way is to remove the door panel and release the wires.
#5
Junior Member
Posts like a Ricer Type-R
Join Date: Dec 2007
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 95seand78z28
Originally Posted by shanerdaner
Can you get them from a junk yard? Just curious if they r hard to get off and put on...TIA!
Shane
Shane
The best way is to remove the door panel and release the wires.
thanks Karl!! I will see if i can find one.... In my opinion $100 is a ton to pay for something like that i can get all four brake pads for less.... thanks for your help!!
Shane
#6
Senior Member
Certified GM nut
Join Date: Jun 2004
Posts: 1,933
Likes: 0
Received 0 Likes
on
0 Posts
#7
Junior Member
Posts like a Ricer Type-R
Join Date: Dec 2007
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 95seand78z28
Don't replace it, fix it,,,,,
http://www.bonnevilleclub.com/forum/...hlight=#931708
http://www.bonnevilleclub.com/forum/...hlight=#931708
#8
Senior Member
Certified Car Nut
Join Date: Apr 2004
Location: Quincy, Ma
Posts: 15,342
Likes: 0
Received 0 Likes
on
0 Posts
its really not that hard of a job.
pics of mine found here. http://www.bonnevilleclub.com/forum/...ghlight=window
pics of mine found here. http://www.bonnevilleclub.com/forum/...ghlight=window
#9
Junior Member
Posts like a Ricer Type-R
Join Date: Dec 2007
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Gumball
its really not that hard of a job.
pics of mine found here. http://www.bonnevilleclub.com/forum/...ghlight=window
pics of mine found here. http://www.bonnevilleclub.com/forum/...ghlight=window
Looks incredible!!
#10
Senior Member
Certified GM nut
Join Date: Jun 2004
Posts: 1,933
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by shanerdaner
Thanks I have some epoxy on mine I put over the old trim but even it is starting to peel up...maybe I can try it this summer or maybe @ a meet if the guys are going to have one that would be great......I will bring the beer......
Looks incredible!!
Looks incredible!!