paint re-touching
#1
Senior Member
Posts like a Turbo
Thread Starter
Join Date: May 2006
Location: Chicago, IL
Posts: 496
Likes: 0
Received 0 Likes
on
0 Posts
paint re-touching
im trying to touch these spots up on my white 92 see bonnie. the spot by the door sorrounding the window is all chipped off and i was wondering if i could just use some glossy spray paint from murray'* auto store. or is there some type of paint code for this black color.also would i have to sand it down and all that or could i just spray over it.
#2
Senior Member
Certified GM nut
Join Date: May 2005
Location: Wickliffe, Ohio
Posts: 2,155
Likes: 0
Received 0 Likes
on
0 Posts
http://putfile.com/pic.php?pic=6/1530228569.jpg&*=f5 By the B pillar there I went to Walmart and went to the care section and got the Dulicolor (sp?) paint touch up pen with the brush. I got the universal black and it works great for that spot. I had a few chips and some other stuff right there to touch up. It'* not perfect but you can't see it was even touched up till your right up near the car.
Ed
Ed
#3
Junior Member
Posts like a Ricer Type-R
Discussing paint for that part is ridiculous when you consider the fact that it'* not even painted. It'* an acrylic/vinyl overlay.
And the part is very inexpensive.
Tell us which one is bad (front door or rear door, driver'* or passenger'*) and we'll give you the part number for a new part, or you can go to a wrecker and get one.
Part should be about $25 new. No more than $10 at a wrecker.
And the part is very inexpensive.
Tell us which one is bad (front door or rear door, driver'* or passenger'*) and we'll give you the part number for a new part, or you can go to a wrecker and get one.
Part should be about $25 new. No more than $10 at a wrecker.
#6
Originally Posted by willwren
Discussing paint for that part is ridiculous when you consider the fact that it'* not even painted. It'* an acrylic/vinyl overlay.
And the part is very inexpensive.
Tell us which one is bad (front door or rear door, driver'* or passenger'*) and we'll give you the part number for a new part, or you can go to a wrecker and get one.
Part should be about $25 new. No more than $10 at a wrecker.
And the part is very inexpensive.
Tell us which one is bad (front door or rear door, driver'* or passenger'*) and we'll give you the part number for a new part, or you can go to a wrecker and get one.
Part should be about $25 new. No more than $10 at a wrecker.
if you want a paint code for the just use GM'* WA8555 Isuggest removing it befor you paint it and sand it with smooth with 400-600 grit sand paper
#10
Senior Member
Posts like a Camaro
Join Date: Nov 2002
Posts: 857
Likes: 0
Received 0 Likes
on
0 Posts
Conceivably, if you can afford some masking tape and find a newspaper, you can actually mask off the areas surrounding this part and paint it while leaving it on the car.
Thread
Thread Starter
Forum
Replies
Last Post
Peterg22000
Detailing & Appearance
16
07-08-2006 02:55 PM