Need seat mounting point data for a '92 Bonneville
#1
Junior Member
Thread Starter
Join Date: May 2006
Location: BonnevilleHell
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Need seat mounting point data for a '92 Bonneville
Hi y'all,
Giving some thought to the day when the cloth interior in my '90 is ragged out. One thought is to upgrade to leather buckets in place of the split bench seating.
So, anybody have the dimensions of the floor mounting points on the 92+ H-bodies for comparison?
Thanks,
Curt
Giving some thought to the day when the cloth interior in my '90 is ragged out. One thought is to upgrade to leather buckets in place of the split bench seating.
So, anybody have the dimensions of the floor mounting points on the 92+ H-bodies for comparison?
Thanks,
Curt
#2
they should work exactly.
I can get measurements of the seats for you from the one I have in my basement.
Here are pictures I took for another member that have some of the measurements:
http://bizio.no-ip.org/bc/seat/index.html
If you click in the middle bottom of the pictures, you should get the full size picture.
I can get measurements of the seats for you from the one I have in my basement.
Here are pictures I took for another member that have some of the measurements:
http://bizio.no-ip.org/bc/seat/index.html
If you click in the middle bottom of the pictures, you should get the full size picture.
#4
Senior Member
Certified Car Nut
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by J Wikoff
Didn't Mike Diaz or somebody else do it?
all the H bodies have the same seat dimensions.
Curt you can install 92+ Bonneville seats into your car without a problem
#5
Junior Member
Thread Starter
Join Date: May 2006
Location: BonnevilleHell
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Thank'* gentleman. It makes sense that GM stuck to a common pattern.
Hmmm.....
Ok, put in two leather buckets...that leaves a gap, might be a good place for a Quarter Stick shifter and a fire bottle...
Hmmm.....
Ok, put in two leather buckets...that leaves a gap, might be a good place for a Quarter Stick shifter and a fire bottle...
Thread
Thread Starter
Forum
Replies
Last Post
padgett
1987-1991
2
10-16-2003 02:32 PM