Has anyone done this before
#1
Junior Member
Posts like a V-Tak
Thread Starter
Join Date: Aug 2009
Location: Baltimore Maryland
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Has anyone done this before
Okk well look i own a 1998 Bonne'ville SE With about 84 K on the dash...But let me get to the point haha..OK has anyone ever taken out the "headlight housing" and got it open by putting it in the oven for a few minutes ? I heard about it Just wasnt to to sure for how long ? and what temperature ? .But i like to hear from someone who has ACTUALLY DONE IT.Im asking this because im soon about to install audi eyebrows inside my headlights.I had people ask me why dont you install the audi eyebrows outside the headlgiht housing its easier.No ! LMaO That is dumb and would look ridiculous & thats defeating the whole purpose of custom audi eyebrows on my 98 bonne'ville SE...The point is i want them actually inside my headlight housing for the full custom effect .Thanks alot any help is definitly taken into consideration
Last edited by BMoReZFYNeST410; 12-14-2009 at 07:16 PM. Reason: .
#2
Retired
Yep, we sure have....
https://www.gmforum.com/t280225/
https://www.gmforum.com/t280225/
__________________
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
#4
DINOSAURUS BOOSTUS
Expert Gearhead
Difference from your year to theirs is they have plastic lenses, you have glass.
Search out 1993 SLE. He made his own angle eye rings on his 93.
Search out 1993 SLE. He made his own angle eye rings on his 93.
#5
DINOSAURUS BOOSTUS
Expert Gearhead
#6
Senior Member
Certified Car Nut
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes
on
0 Posts
its pretty easy, have a heat gun handy. The 96-99 glass is more fragile than the 92-95 glass.
heat up the area you are working with and then with a wide tip screwdriver pry apart the lense from the houding. IF you not careful you will break the glass or the housing
heat up the area you are working with and then with a wide tip screwdriver pry apart the lense from the houding. IF you not careful you will break the glass or the housing
Thread
Thread Starter
Forum
Replies
Last Post