Putting a HUD in a 94SE...
#1
Senior Member
True Car Nut
Thread Starter
Join Date: Jan 2006
Location: NEBF:06,07 | NYBF:06,07 | ONBF:06,07 | CNBF:06 & more............
Posts: 8,029
Likes: 0
Received 0 Likes
on
0 Posts
Putting a HUD in a 94SE...
Can it be done with out swoping in a SSEI dash???
or can i just get the HUD unit an plug and play?
or can i just get the HUD unit an plug and play?
#2
Senior Member
Certified Car Nut
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes
on
0 Posts
Re: Putting a HUD in a 94SE...
Originally Posted by bandit
Can it be done with out swoping in a SSEI dash???
or can i just get the HUD unit an plug and play?
or can i just get the HUD unit an plug and play?
well....no....the SSEi dash has a hump on it, and then the trim panel sits ontop of the dash....the hud unit is pretty big..
the unit is sorta kinda plug and play....you should have a FSM before you attempt this... you will need to locate all the wires from the HUD and your dash harness...
i am only doing this because i found a SSEi with the same color interior and the same Year as my car...this way i know the wire colors are the same.....
the other option is to get the HUD and the total dash harness....i have not looked into this yet, and i dont think that it will work because of the differences in the cluster
i have all my wires mapped out Via the FSM
Thread
Thread Starter
Forum
Replies
Last Post
JLAudioEclipse
1992-1999
17
03-14-2004 12:13 PM