clearin tails....and fixin fog bulb
#1
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Dec 2005
Location: jersey
Posts: 740
Likes: 0
Received 0 Likes
on
0 Posts
clearin tails....and fixin fog bulb
hey guys I was wondering if anyone has a step by step pictures showing how to clear the taillights of a 00+ bonny???
and also one of my fog light bulbs went out, so I have to replace it but I can't get behind it cause of the cover in the wheel well, do those plastic pins pop out or what??
and also one of my fog light bulbs went out, so I have to replace it but I can't get behind it cause of the cover in the wheel well, do those plastic pins pop out or what??
#2
Senior Member
Certified Car Nut
Join Date: Oct 2002
Posts: 11,308
Likes: 0
Received 0 Likes
on
0 Posts
Some pics are here...
http://www.bonnevilleclub.com/forum/...ed+entire+rear
Also a techinfo article: http://www.bonnevilleclub.com/forum/...e=article&k=85
For the outer tail pieces you want to cut along the outside of the housing that holds the amber piece. If you cut along the grooves on top and cut along both sides and a small part of the bottom you can pull the housing out enough to grab the amber piece and pull it out.
http://www.bonnevilleclub.com/forum/...ed+entire+rear
Also a techinfo article: http://www.bonnevilleclub.com/forum/...e=article&k=85
For the outer tail pieces you want to cut along the outside of the housing that holds the amber piece. If you cut along the grooves on top and cut along both sides and a small part of the bottom you can pull the housing out enough to grab the amber piece and pull it out.
#4
Senior Member
Certified Car Nut
Join Date: Oct 2002
Posts: 11,308
Likes: 0
Received 0 Likes
on
0 Posts
This is the only thing I can come up with until I get home.
When you take the taillight out you'll know what I mean.
You will cut around the housing as shown by the red line below, but you're cutting on the BACKSIDE of the taillight of course.
When you take the taillight out you'll know what I mean.
You will cut around the housing as shown by the red line below, but you're cutting on the BACKSIDE of the taillight of course.
Thread
Thread Starter
Forum
Replies
Last Post