about 24' rims.
#1
Junior Member
Posts like a V-Tak
Thread Starter
Join Date: Aug 2009
Location: Baltimore Maryland
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
about 24' rims.
I own a 98 bonne'ville SE and eventually i would like to put some 24'* on my ride.But i was wanting to know what must i know before i decide to buy 24'* for my car I.E bolt pattern etc etc...A few people i know on cardomain has there bonnies on 24'*.But when i tryed to do my reasearch it didnt give me anything besides only my car can fit 20'* and i know that isnt true.SooO basically what must i know in order to have 24' rims fit my ride..Thanks alot hope to hear some feedback some from you guy'*.
#2
Senior Member
Posts like a Corvette
Join Date: Jun 2008
Location: Cleveland, OH
Posts: 1,389
Likes: 0
Received 0 Likes
on
0 Posts
bolt pattern is 5x115, not sure about the total tire width on the 98'* but on the 00+ 145 is the widest you can go without rubbing, and your going to want to consider a brake upgrade because of all the extra rotating mass you are adding
the bigger rims will be rougher on your suspension, steering, brakes, and probably make your speedo show incorrectly
the bigger rims will be rougher on your suspension, steering, brakes, and probably make your speedo show incorrectly
#4
Administratus Emeritus
Certified Car Nut
Any wheel including 24 will fit the Bonneville. Itz just a matter of matching the tire series (height). For 24 inchers, you'll be riding thin for sure.
#5
Senior Member
True Car Nut
As the wheel size get'* bigger the tire size sidewall will get shorter so they can all fit within the wheel well like Venom said. The problem at this point is that the ride can be a bit bumpy and what you get for looks you give up for tire and ride performance.
Thread
Thread Starter
Forum
Replies
Last Post
cballweg
Bonneville GXP/ Northstar Powered Cars
5
01-24-2006 11:13 PM
Lowrider0308
Your Ride: GM Pictures & Videos
22
11-06-2005 06:24 PM