Lowering Spring
#1
Junior Member
Thread Starter
Join Date: Mar 2006
Location: Montreal, Quebec, Canada
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Lowering Spring
Where I can find a lowering spring kit for my 94 bonneville SSei..... Grand Prix - Gen 2 SSC lowering springs, on zzperformance.com, will fit on my bonneville ???
#2
Junior Member
Posts like a Ricer Type-R
No, Grand Prix springs will not work. Lowering springs for your car will be custom. Do a search on 'lowering springs'. You'll find a couple members that have done it.
#3
Senior Member
Posts like a Camaro
Join Date: Jun 2005
Location: n.h.
Posts: 1,066
Likes: 0
Received 0 Likes
on
0 Posts
www.coilsprings.com
They custom make to ur specs. Was quoted about $300 for mine. U have a choice on heavyduty.......front drop/back drop. Haven't got them cause there'* alot more to do to drop our cars the right way!
They custom make to ur specs. Was quoted about $300 for mine. U have a choice on heavyduty.......front drop/back drop. Haven't got them cause there'* alot more to do to drop our cars the right way!
#4
Junior Member
Posts like a Ricer Type-R
That'* correct. I think 95naSta (Mike) is still getting things right after his drop. Trying to adjust other stuff to get his geometry back.
Some places sell a KIT to get it right, but there is nothing like that for H bodies.
Some places sell a KIT to get it right, but there is nothing like that for H bodies.
#5
Senior Member
True Car Nut
Join Date: Feb 2003
Location: Philly
Posts: 4,508
Likes: 0
Received 0 Likes
on
0 Posts
Yep. I got 2" front and 1.5" rear F41 spec drop springs from www.coilsprings.com. The rear 1.5" drop ended up being closer to the 2" front.
With my the drop I needed 1* camber bolts for the rear. The front however had plenty of adjustment left.
Right now I'm trying to figure out how long my endlinks should be to bring the preload of the strut bar back to factory specs.
With my the drop I needed 1* camber bolts for the rear. The front however had plenty of adjustment left.
Right now I'm trying to figure out how long my endlinks should be to bring the preload of the strut bar back to factory specs.
#6
Senior Member
Certified GM nut
Join Date: Jan 2006
Posts: 2,028
Likes: 0
Received 0 Likes
on
0 Posts
i dont know if this helps --
Drivewire
ok so i can't seem to get the link thingy to work but whatever -- you can copy and paste
dont know if it will work or not or if it'* not what ur looking for but there you go anyway
Drivewire
ok so i can't seem to get the link thingy to work but whatever -- you can copy and paste
dont know if it will work or not or if it'* not what ur looking for but there you go anyway
#8
Senior Member
True Car Nut
Originally Posted by 95naSTA
Hmm. thats a new on to me. But only a 1" drop?
Thread
Thread Starter
Forum
Replies
Last Post