I need a nose cone for my 69 bonne
#2
#3
69 Bonneville nose and rear bumper inserts
Just signed up here and noticed this post,, I reproduce the endura nose and rear bumper pieces,, but I use metal impregnated resin,, molded and primed, ready for paint,,
I need the metal backing piece that the origional nose and rear piece was bonded to,
they are a direct bolt on replacement part, just like the origional part, just won't crack like the origional pieces did, guarenteed
Price is Nose or bumper insert is 350$ each with a 100$ core charge each for the backing plates,
I havn't figured out how to post pictures here yet but will figure it out and post some pictures of some I just finished up,,,
you can contact me @ slikwilly1@live.com Thanks Bill....
I need the metal backing piece that the origional nose and rear piece was bonded to,
they are a direct bolt on replacement part, just like the origional part, just won't crack like the origional pieces did, guarenteed
Price is Nose or bumper insert is 350$ each with a 100$ core charge each for the backing plates,
I havn't figured out how to post pictures here yet but will figure it out and post some pictures of some I just finished up,,,
you can contact me @ slikwilly1@live.com Thanks Bill....
#4
here are some pictures of the nose reproduction piece I make,, This one is fit to the hood, minus the origional gap for the rubber seal, can make them either way,,,Thanks Bill
#6
Senior Member
True Car Nut
Considering that last post is four years old you'd be better off posting a new thread of your own.
As per forum rules that would be the way to go as well.
Good luck finding your part.
As per forum rules that would be the way to go as well.
Good luck finding your part.
Thread
Thread Starter
Forum
Replies
Last Post