3.5L upper intake on 3.4L lower intake/engine

Reply Subscribe

Thread Tools

Search this Thread

10-24-2014, 08:39 AM

LA1

Member

Posts like a V-Tak

Thread Starter

Join Date: May 2013

Location: east coast

Posts: 99

Likes: 13

Received 7 Likes on 6 Posts

3.5L upper intake on 3.4L lower intake/engine

Has anyone done this ? This picture is from WOT-Tech.com its a project they are doing. Looks like the valve covers need to be switched.

Attached Thumbnails

3.5L upper intake on 3.4L lower intake/engine-35lmanifoldona34l_zps4426f4f9.jpg

Last edited by LA1; 10-24-2014 at 08:44 AM.

Reply Like

10-24-2014, 12:33 PM

jwfirebird

Senior Member

True Car Nut

Join Date: Dec 2009

Location: western,ny state

Posts: 9,616

Likes: 51

Received 579 Likes on 497 Posts

jwfirebird has a reputation beyond repute

more room in the front for it. not sure why they would do that unless there is an issue with the dog bones on earlier ones.

my 07 3500 monte

Attached Thumbnails

3.5L upper intake on 3.4L lower intake/engine-20140329_130935_zps198ba190.jpg

Reply Like

10-24-2014, 12:46 PM

LA1

Member

Posts like a V-Tak

Thread Starter

Join Date: May 2013

Location: east coast

Posts: 99

Likes: 13

Received 7 Likes on 6 Posts

Quote:

more room in the front for it. not sure why they would do that unless there is an issue with the dog bones on earlier ones.

you mean for the valve covers being reversed ? if so , one valve cover has the PCV the other has the crankcase vent that goes to the air intake boot. So now the PCV is all the down in the back, the breather is about the same distance other side now. wait those are the valve covers for the 3.4L the upper intake is the only part added. so there should not be a clearance issue, unless closing the hood.

Last edited by LA1; 10-24-2014 at 12:49 PM.

Reply Like