ehh stock 3.1 is 140...So we will see my buddy said it should be around 240 but idk if a M62 is that capable..Now im in the market for an M62 and idlers n ****
but for now I have some more milling to do yet and a bit of other fab work but its bassically going to blow into the top of the manifold and the old manifold tb location will get capt off and the air will come in from the */c utilizing the 3.1 TB and MAF along with a FMU im goin to cut it as flat as possible within .001'* of an inch so I can put a gasket in there and mount it down sealed between the plate and the intake manifold and then im gona cut a huge hole in the top and the */c is already flat so I just have to cut it so the */c air can flow through into the intake tv cable is going to have to move along with the iac and tps sensors, Idk if their leads will meet to be lengthened to make it work..This will obviously require a custom Hood too!
2000 Suburban 3" lift and some power mods..The daily
06 impala SS CAI,Exhaust,pirellies the other daily
86 camaro Far from stock......The hot rod
1992 camaro RS 25th anv 350 5 spd..The cruiser