Wheres the MAP sensor
10-16-2014, 04:46 PM
#4
Member
Posts like a V-Tak
sounds like you have a 3.8 L , it will be somewhere close to the manifold usually at the back as it senses vacuum changes. there are a few Chevrolet dealers that have online parts order with exploded views , if you still cant find try googling buy map for 3.8L impala.
10-17-2014, 10:58 AM
#5
Senior Member
True Car Nut
LA1, They did offer a 3.5L in 2006...
I am trying to find a pic of the sensor on the motor, but was unable to do so, I did find a pic of the sensor though, although it is upside down in this pic, hopefully this helps a bit.
When you remove the cover you should be able to see it, most likely on the left side of the upper intake.
I am trying to find a pic of the sensor on the motor, but was unable to do so, I did find a pic of the sensor though, although it is upside down in this pic, hopefully this helps a bit.
When you remove the cover you should be able to see it, most likely on the left side of the upper intake.
10-17-2014, 11:21 AM
#6
Member
Posts like a V-Tak
WILLIAM E Yup I have a 2006 Malibu with a 3.5. I believe they also offered a 3.9L and a V8 Impala
Here is a you tube video
Here is a you tube video
Last edited by LA1; 10-17-2014 at 11:25 AM.
10-17-2014, 04:57 PM
#7
Senior Member
True Car Nut
That video is for replacing the MAF Sensor, they inquired about the MAP Sensor, it really won't help them with replacing the MAP Sensor.
The following users liked this post:
WilliamE (10-18-2014)
10-17-2014, 11:22 PM
#9
Member
Posts like a V-Tak
That video is for replacing the MAF Sensor, they inquired about the MAP Sensor, it really won't help them with replacing the MAP Sensor.
Thread
Thread Starter
Forum
Replies
Last Post
DarkShadow
General GM Chat
10
09-28-2007 06:29 AM