04 2.2 finnally dropped tranny but got parts i dotn know
10-07-2012, 06:17 PM
#1
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Oct 2012
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
04 2.2 finnally dropped tranny but got parts i dotn know
hi i finnally got the manual transmission out of my 2004 cav
problem is i dunno if the crank shaft damage its just scratched up
and there is something on top of tranny i guessing broken off?? or what i have no idea maybe someone can tell me there pics too fring its hard to do by yourself on floor i going to have hell time getting it back up ugh
and there is 2 caps the one i holding is not the one that u see sitting on transmission it was sitting beside it though just laying there
problem is i dunno if the crank shaft damage its just scratched up
and there is something on top of tranny i guessing broken off?? or what i have no idea maybe someone can tell me there pics too fring its hard to do by yourself on floor i going to have hell time getting it back up ugh
and there is 2 caps the one i holding is not the one that u see sitting on transmission it was sitting beside it though just laying there
10-07-2012, 06:32 PM
#2
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Oct 2012
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
and the book talks about putting grease on the release cylinder and bearing but this doesnt come with a bearing? so whats up with that as its just the thing
10-07-2012, 06:47 PM
#3
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Oct 2012
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
i figured out the gear i see is just the old clutch plate but i trying to use the power built clutch kit algnment tool and none of the fittings fit snuggly at the end inside the engine they all loose except the 2 cuz there too big so what do i do there?
10-08-2012, 08:04 AM
#7
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Oct 2012
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
and what is a gear head?
and what is the other parts i found i think it looks like it sits on the bracket that holds shifter cables
is it broken off when i dropped it whats the extra cap thing
and what is the other parts i found i think it looks like it sits on the bracket that holds shifter cables
is it broken off when i dropped it whats the extra cap thing
10-08-2012, 02:41 PM
#9
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Oct 2012
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
since i having so much problems getting tranny back in like i was able to get a bottom bolt in and a top bolt but tightening in i couldnt get it to slide in am i going to run risk of damaging the the fingers??
how u get it to slide in with just a 2 ton jack?
how u get it to slide in with just a 2 ton jack?
10-08-2012, 04:11 PM
#10
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Oct 2012
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
ok still stuck i was able to get in like 4-5 bolts in to tighten in and about less then a inch from the two halves from touching i use a screw driver on the fly wheel but the transmission dont turn even if i shift gears whats going on so its not in??? its it damaging something i cant slide it in by myself on just a plain 2 ton jack
so what do i do or whats going on i try turning the drive shafts they move but not stiff like if it were in gear
so is it in or not? em i damaging something?
thing is pissing me off be easier if i had proper things to live a transmssion 2 feet off ground ugh
so what do i do or whats going on i try turning the drive shafts they move but not stiff like if it were in gear
so is it in or not? em i damaging something?
thing is pissing me off be easier if i had proper things to live a transmssion 2 feet off ground ugh