hi i had to get a replacement clip i have the old line pushed in where u see the reses i put oil on it too i put the clip in but i cant push it down by hand i even tap lightly with a hammer or used vise grips to push on but cant why what special trick you need to do?
and the book hayes book doesnt even talk about anything like this they talk about a push pull system like a air fitting book is totally useless for that and a manual transmission no pictures of anything
and as for fittin the clip has to go inside the slave cylinder and around the line and i have it lined up i push all the way in the line and try to push the clip inside as the 2 ends are supposed to come outside of the slave cylinder on the sides but i cant get it to go
so i bled it a bunch of times and its still soft not as stif as before feels like no pressure at all but works i guess i dunno as the car doesnt start and there is no codes what would have caused that ? what sensor might not be hooked up from me dropping tranny?