Chevrolet When starting new posts, please specify YEAR, MAKE, MODEL, ENGINE type, and whatever modifications you have made.

04 2.2 engine doesnt start after clutch replace

Thread Tools
 
Search this Thread
 
Old 10-09-2012, 03:51 PM
  #1  
Senior Member
Posts like a 4 Banger
Thread Starter
 
comet424's Avatar
 
Join Date: Oct 2012
Posts: 106
Likes: 0
Received 0 Likes on 0 Posts
comet424 is on a distinguished road
Default 04 2.2 engine doesnt start after clutch replace

ok so i have posted other topics about dropping the tranny and putting it back it

this is for a 2004 cav 2.2 manual car


i did everything and now engine turns over but doesnt start the engine light stays on while engine is cranking

what did i miss? all i can think of is a have extra wire harness from of car its a 2 wire it has a Purple wire and yellow wire i have no idea where that plugs into??? its basicly right in the bunch of wires at the fan

and all i could think of is that one wire i had to put on the stud of of the transmission thats right behind the rad fan motor it has bumps on it to make better connection would that cause anything?

what can i check that would have caused this

and there are no engine codes as engine was running fine before i dropped tranny plus i had disconnected battery
Old 10-09-2012, 04:01 PM
  #2  
Senior Member
Posts like a 4 Banger
Thread Starter
 
comet424's Avatar
 
Join Date: Oct 2012
Posts: 106
Likes: 0
Received 0 Likes on 0 Posts
comet424 is on a distinguished road
Default

i just tried
if i spray starter fluid in the intake it takes a few turns but starts up for a few seconds then dies

dont tell me thats anti theft?? and if so whats the trick to fix it for a 2004 cav
as the picture of the pad lock and car goes away just not the engine light
Old 10-09-2012, 04:22 PM
  #3  
Senior Member
Posts like a 4 Banger
Thread Starter
 
comet424's Avatar
 
Join Date: Oct 2012
Posts: 106
Likes: 0
Received 0 Likes on 0 Posts
comet424 is on a distinguished road
Default

and the fuel pump does work as i can hear it
Old 10-09-2012, 04:34 PM
  #4  
Retired



Certified Car Nut
 
Mike's Avatar
 
Join Date: Jul 2003
Location: Dark Side, AZ
Posts: 17,920
Received 1,780 Likes on 1,304 Posts
Mike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond repute
Default

The check engine light is an indication something is not working right. You need to go back through everything to make sure everything is connected.
__________________
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel

Old 10-11-2012, 11:50 AM
  #5  
Senior Member
Posts like a 4 Banger
Thread Starter
 
comet424's Avatar
 
Join Date: Oct 2012
Posts: 106
Likes: 0
Received 0 Likes on 0 Posts
comet424 is on a distinguished road
Default

ya i had found it it was crank shaft sensor wire was off and book says its on back of engine its acually on the front of the engine above starter and scan tool does not tell you there is an error
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Skyward
Chevrolet
7
04-21-2015 09:10 PM
jessie_harbin
1992-1999
13
01-28-2006 08:56 PM
dandyd
1987-1991
23
07-11-2005 10:35 PM
harley
1992-1999
6
09-09-2004 06:03 PM



Quick Reply: 04 2.2 engine doesnt start after clutch replace



All times are GMT -4. The time now is 12:05 AM.