Retrofitting stabilitrak on a 2004 impala LS
#1
Retrofitting stabilitrak on a 2004 impala LS
I decided about a week and a half ago that I was gonna retrofit stabilitrak on my 2004 Chevy Impala LS. I went to a local wrecker and they had a 2003 Oldsmobile aorura that had the JL4 option. So pulled the yaw and lateral acceleration sensor as well as the connectors. I decided that I was gonna use the control unit and about a week ago I wired in the lat & yaw plus the steering sensor. I pinned out all the wiring and got ready to wire in the system. Today I finally got to install the control unit. Witch turned out to be faulty as I knew about a week ago just data testing ect. DTC C1214 and c1248. So I found one off eBay and ordered it. I'm going to post pictures tomorrow.
#2
Senior Member
Posts like a Turbo
Sounds very interesting
it would be nice if you could proved a wiring diagram with pin position'*
numbers in connections.
So some of us can upgrade like you did
I guess I just have a question if the ECM or body control mod has to be flashed?
it would be nice if you could proved a wiring diagram with pin position'*
numbers in connections.
So some of us can upgrade like you did
I guess I just have a question if the ECM or body control mod has to be flashed?
#6
Retired
The following users liked this post:
Soft Ride (11-04-2015)
Thread
Thread Starter
Forum
Replies
Last Post