98 Buick LeSabre Heater elbows tensioner.
10-07-2016, 05:53 PM
#1
Senior Member
Posts like a Turbo
Thread Starter
98 Buick LeSabre Heater elbows tensioner.
Does anyone know if they make a metal replacement for the heater hose elbows that slide into the belt tensioner? I already know and replace the coolant elbow at the intake with a metal one. Having to do some work on the 98 and would like to replace the plastic ones if there are metal replacements.
10-07-2016, 07:04 PM
#2
Senior Member
True Car Nut
There are: Dorman Heater Hose Fitting 47065HP- Read2Reviews onDorman #47065HP
There has been reports of the occasional sketchy O-Ring on the Dorman part, but that is the only concern thus far.
For the longest time there was no metal units, and the world was a much scarier place.
There has been reports of the occasional sketchy O-Ring on the Dorman part, but that is the only concern thus far.
For the longest time there was no metal units, and the world was a much scarier place.
10-07-2016, 08:05 PM
#3
Senior Member
Posts like a Turbo
Thread Starter
There are: Dorman Heater Hose Fitting 47065HP- Read2Reviews onDorman #47065HP
There has been reports of the occasional sketchy O-Ring on the Dorman part, but that is the only concern thus far.
For the longest time there was no metal units, and the world was a much scarier place.
There has been reports of the occasional sketchy O-Ring on the Dorman part, but that is the only concern thus far.
For the longest time there was no metal units, and the world was a much scarier place.
The following users liked this post:
Mad_Coachman (10-09-2016)
Thread
Thread Starter
Forum
Replies
Last Post
big_news_1
General GM Chat
8
02-12-2007 01:29 PM