'03 Lesabre heated seat wiring coloring
08-26-2014, 04:04 PM
#1
Junior Member
Posts like a V-Tak
Thread Starter
Join Date: Mar 2014
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
'03 Lesabre heated seat wiring coloring
Does anyone know the coloring of the wires for the driver'* car seat heater, both the seat pan and seat back rest?
My 2003 Buick Lesarbe driver'* seat heater is not working, brought the vehicle used and the seat has never worked. I figured I start with trying to check for resistance in wiring located under the seat.
Fuses appear to be ok.
Mike from Cleveland
My 2003 Buick Lesarbe driver'* seat heater is not working, brought the vehicle used and the seat has never worked. I figured I start with trying to check for resistance in wiring located under the seat.
Fuses appear to be ok.
Mike from Cleveland
08-26-2014, 05:41 PM
#2
Senior Member
Posts like a Camaro
If you remove the seat from the car and flip it over the bottom cushion is real easy to remove from the seat frame. I'm betting the elmant is bad.
08-26-2014, 08:51 PM
#5
Senior Member
True Car Nut
Stupid 5 minute rule....
I never pull the seat, just remove the seat covers......the new grids go over the old ones, and have self adhesive to hold in place.....just connect the new harnesses......I replace both, just a matter of time before the other one goes, so while you are in there....
I never pull the seat, just remove the seat covers......the new grids go over the old ones, and have self adhesive to hold in place.....just connect the new harnesses......I replace both, just a matter of time before the other one goes, so while you are in there....
Thread
Thread Starter
Forum
Replies
Last Post