awhile back i had some trouble with my 1992 buick regal custom 3.8 and had it repaired .. it turned out to be the crankshaft positioning sensor ... I put over 2 thousands miles on it .. This morning 10/22/2011 I went to start it and she only cranks but does not turn over (on). any suggestions would be much help to me .. here was my last post months ago ..
can any one help me please ?
I am frank , I have a 92 buick regal custom 3.8 ...I am having trouble with the auto. she starts and perhaps 1 or 2 miles into driving she turns off. She starts back up after 10 to 15 minutes. The guage does not register been hot untill she sits.I changed the plugs,relay switches,ignition cables and ignition module,air filter and a radiator flush. I had her for 1 year this june 2011. she has 106k miles. I changed the oil every 2k miles and rebuild the transmission 4 months ago. today is june 23 2011. I really need some help. auto zones diagnostics comes up with no codes.what to do ? is it a coolent sensor or o2 sensor? would a bad starter cause the car to stall while driving . I am out of options here.. can someone help with any suggestions please >> my e mail is email@example.com