Buick When starting new posts, please specify YEAR, MAKE, MODEL, ENGINE type, and whatever modifications you have made.

Oil Pump?

Thread Tools
 
Search this Thread
 
Old 12-24-2010, 05:24 PM
  #1  
Junior Member
Thread Starter
 
myloth's Avatar
 
Join Date: Dec 2010
Location: NY
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
myloth is on a distinguished road
Default Oil Pump?

Hi everybody my car is 1996 Park Avenue Ultra 3800 SC. .Well before I left (I didnt take the PA)the PA lost oil pressure down to about 30psi then by time I got (4mile trip to doc)home it went to 20.Now it won't go over 20 and the red light comes on at idle after warmup.It'* not the gauge or sending unit malfunctioning as it'* associated with valvetrain noise(I would assume this means a case of real low pressure and not electricial) when the gauge goes red.Obviously I don't want to run it till this is fixed.Do these pumps go bad?I know they are crank driven and usually don't but...WHat about the housing for the filter any problems?Any help or ideas would be appreciated thanks.I am hoping it'* not engine related as in bearings and such.
myloth is offline  
Old 12-24-2010, 06:52 PM
  #2  
Retired Senior Admin

Expert Gearhead
 
Danthurs's Avatar
 
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes on 24 Posts
Danthurs is a name known to allDanthurs is a name known to allDanthurs is a name known to allDanthurs is a name known to allDanthurs is a name known to allDanthurs is a name known to all
Default

Drain the oil and look real close. Do you see any metal in the oil? Seeing you have engine noise I would say u have a bearing going out.
Danthurs is offline  
Old 12-24-2010, 10:14 PM
  #3  
Junior Member
Thread Starter
 
myloth's Avatar
 
Join Date: Dec 2010
Location: NY
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
myloth is on a distinguished road
Default

I pulled the filter and oil no metal.The engine runs ok just valvetrain noise when pressure drops.
myloth is offline  
Old 12-25-2010, 12:18 PM
  #4  
Retired



Certified Car Nut
 
Mike's Avatar
 
Join Date: Jul 2003
Location: Dark Side, AZ
Posts: 17,920
Received 1,780 Likes on 1,304 Posts
Mike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond repute
Default

Change you filter and oil. See what happens.

Your going to get valve noise because of loss of oil pressure to your lifters.
__________________
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel

Mike is offline  
Old 12-25-2010, 01:05 PM
  #5  
Senior Member
True Car Nut
 
Jack's Avatar
 
Join Date: Sep 2005
Posts: 3,105
Likes: 0
Received 0 Likes on 0 Posts
Jack is on a distinguished road
Default

I'm assuming the pressure doesn't go back up as the RPMs increase.

how many miles are on the car? I've heard of blockage from sludge build up on the pick up screen for the oil pump causing similar thing. Before doing an oil change try running some Seafoam through it, then change the oil.
Jack is offline  
Old 12-25-2010, 05:37 PM
  #6  
Junior Member
Thread Starter
 
myloth's Avatar
 
Join Date: Dec 2010
Location: NY
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
myloth is on a distinguished road
Default

I did change the filter and added oil no help,the rpms do go up to about 30 at around 3k rpms but thats it.At idle they drop to almost 0.Also when the oil was very cold it went up to 100psi.
myloth is offline  
Old 12-25-2010, 05:39 PM
  #7  
Junior Member
Thread Starter
 
myloth's Avatar
 
Join Date: Dec 2010
Location: NY
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
myloth is on a distinguished road
Default

I should have said the pressure goes up to 30psi but no more after the intial 5 seconds cold or not.And drops to 0psi almost around 1100 rpms.
myloth is offline  
Old 12-26-2010, 09:21 AM
  #8  
Junior Member
Thread Starter
 
myloth's Avatar
 
Join Date: Dec 2010
Location: NY
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
myloth is on a distinguished road
Default

I should say the engine has 117k and just had the intake gaskets and egr tube replaced.And the oil and filter was changed twice in the last 300-400 miles.
myloth is offline  
Old 10-18-2014, 11:46 AM
  #9  
Junior Member
 
imreallyafordguy's Avatar
 
Join Date: Oct 2014
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
imreallyafordguy is on a distinguished road
Default

Hi everybody. I'm new here but I've been having the same problem with a 98 lesabre. Oil pressure drops to nil after warmup. Did you guys ever figure out the problem on the park ave? If so I could really use smome advice. This ones got me stymied.

Last edited by imreallyafordguy; 10-18-2014 at 11:49 AM.
imreallyafordguy is offline  
Old 10-18-2014, 11:50 AM
  #10  
Retired



Certified Car Nut
 
Mike's Avatar
 
Join Date: Jul 2003
Location: Dark Side, AZ
Posts: 17,920
Received 1,780 Likes on 1,304 Posts
Mike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond repute
Default

This thread is almost 4 years old. Surely the OP'* gone on now.

It would actually be best if you started your own thread with all fresh information about your car. This is to better help us help you.
__________________
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel

Mike is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
skips45acp
Oldsmobile
1
08-16-2013 09:46 AM
cjpenny89
1992-1999
3
09-13-2006 11:15 AM
WickedJstr
1992-1999
4
10-30-2005 11:06 PM
95neongirl
1992-1999
2
05-03-2004 05:13 PM
greenmoose92
1992-1999
5
11-02-2003 09:02 PM



Quick Reply: Oil Pump?



All times are GMT -4. The time now is 11:24 PM.