Originally Posted by GunsOfNavarone
Replaced a control arm in under one hour using non air tool and no lift... impressive!
thank you sir. it was actually alot easier than i originally thought. gm actually did a good job thinking through this job. the nuts had these neat little tabs on them so i didnt need to put a wrench on it. not that i could have because the wrench i have to fit on those nuts was wayyyy too long. i didnt even need my fork for the ball joint either. just undid the swaybar balljoint and the 2 long bolts. didnt touch the brakes shock axle tierods or anything else at all apart from the wheel.
6000k headlights, LED license plate fog lights, tinted taillights and to top it all off, 2 12" air horns!
the gf:'00impy 3.8, every option. COTM July 2013