Buick When starting new posts, please specify YEAR, MAKE, MODEL, ENGINE type, and whatever modifications you have made.

Electrical Voodoo?

Thread Tools
 
Search this Thread
 
Old 09-26-2015, 01:40 PM
  #1  
Junior Member
Thread Starter
 
jdwhistle's Avatar
 
Join Date: Sep 2015
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
jdwhistle is on a distinguished road
Default Electrical Voodoo?

The problem with my '02 Buick Regal started with a pronounced hesitation and "miss" on acceleration and it set a "multiple misfire" code. I always start electric diagnosis with a battery check, and yes, the battery had gone bad. Tested alternator--it was good. I replaced the battery, started the car and over 2-3 minutes the running deteriorated to a stall and then no start condition. Had the ignition control module tested--it was bad. Ohmed the coils and got consistent, but high resistance on all three, so I replaced the module and 3 coils. Car starts and runs, but still misses. Next morning the new battery is not only completely discharged, it has gone bad. I exchanged the battery and took the alternator to a shop for testing. Alternator tests as good. Install battery, car starts and runs, still has the miss. Next morning, second new battery is discharged and has gone bad. There is no evident short circuit or damage to the cables. Am I just having bad luck with batteries, or is there some other explanation for this battery killing phenom? I just metered a 0.9 amp load on the battery with the ignition "off". This seems really high. What could pull that much current? I don't think any interior lights are on...
Old 09-26-2015, 04:19 PM
  #2  
Senior Member
True Car Nut
 
rjolly87's Avatar
 
Join Date: Jun 2003
Location: Las Cruces, NM
Posts: 7,270
Received 457 Likes on 359 Posts
rjolly87 has a brilliant futurerjolly87 has a brilliant futurerjolly87 has a brilliant futurerjolly87 has a brilliant futurerjolly87 has a brilliant futurerjolly87 has a brilliant futurerjolly87 has a brilliant futurerjolly87 has a brilliant futurerjolly87 has a brilliant futurerjolly87 has a brilliant futurerjolly87 has a brilliant future
Default

That is absurdly high. Your next step would be to start yanking fuses and checking battery cables to make sure there is no shorting to ground. When you yank fuses, pay attention to the load. It should drop substantially once you remove the fuse from the affected circuit. Pull them one at a time so you don't get mixed around.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
sgupt
Audio (and aftermarket electronics)
13
04-24-2008 02:29 PM
CDecker
1992-1999
7
11-21-2002 03:16 PM
gramma95
1992-1999
2
10-21-2002 08:57 AM
Tonyrodz
1992-1999
15
09-23-2002 11:20 PM
ridic2002
1992-1999
7
09-04-2002 03:17 PM



Quick Reply: Electrical Voodoo?



All times are GMT -4. The time now is 06:40 AM.