Replace busted 4t65e with a 4t60e
#1
Replace busted 4t65e with a 4t60e
The tranny'* busted in my 2000 Buick Regal. It is a comuter/daily driver so I'm not interested in hi-performance for this car. The engine is a series II L36 and the busted tranny is a 4t65e. What I'm wondering is if I can replace the 4t65e with a 4t60-e which I have on hand?
From what I've read replacing the 60e with a 65e is difficult because the pcm and harness of a 60e car does not suppurt the electronic modulator used by a 65e. But, can I put a 60e tranny in a 65e car, modifiy the plug (delete modulator wires) and run a vacume line to the modulator on the 60e?
From what I've read replacing the 60e with a 65e is difficult because the pcm and harness of a 60e car does not suppurt the electronic modulator used by a 65e. But, can I put a 60e tranny in a 65e car, modifiy the plug (delete modulator wires) and run a vacume line to the modulator on the 60e?
#2
DINOSAURUS BOOSTUS
Expert Gearhead
You would need to tune the pcm with something like a DHP and Tiny Tuner to be able to make the change. Otherwise you'd throw a bunch of codes and the pcm would reek havoc trying to control the wrong transmission.
Overall though...yes it could be done.
Overall though...yes it could be done.
Thread
Thread Starter
Forum
Replies
Last Post
radomirthegreat
Performance, Brainstorming & Tuning
9
12-24-2007 08:13 AM
SSEi95
Performance, Brainstorming & Tuning
18
02-07-2006 10:41 PM