Part numbers for GXP suspension components
#1
Junior Member
Thread Starter
Join Date: Oct 2003
Location: Detroit, Michigan
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Part numbers for GXP suspension components
I was wondering if anyone knows the part numbers for the GXP suspension??
Front- 30mm stabilizer bar
Rear - Monotube Decarbon rear dampers, 22in. stabilizer bar
Are there any other suspension differences from a SE? Will these parts fit on a SE? Thanks for all your help.
Front- 30mm stabilizer bar
Rear - Monotube Decarbon rear dampers, 22in. stabilizer bar
Are there any other suspension differences from a SE? Will these parts fit on a SE? Thanks for all your help.
#2
Senior Member
Posts like a Camaro
best bet is to call a dealer and find a cool parts guy. some of them are very strange, and will question why you want the data, but most that i've talked to are pretty nice guys.
and we have a few (or at least used to) here on the boards who work at dealerships and can help out...
and we have a few (or at least used to) here on the boards who work at dealerships and can help out...
#3
Junior Member
Thread Starter
Join Date: Oct 2003
Location: Detroit, Michigan
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
part # description list GMS cost
front
25768516 strut tower brace 81.31 47.97
22197599 front chassis spring 95.81 54.61
25649664 front stabilizer bar 116.88 66.62
89047690 front strut 122.10 61.05
rear
25668549 rear spring 75.88 43.25
25666234 rear stabilizer bar 114.84 65.46
89047688 rear left absorber 229.50 114.75
89047689 rear right absorber 229.50 114.75
There, I answered my own question.
So here is another one - if someone put all of these components on a SE or SLE would it handle like a GXP??? I would think it would be pretty close.
front
25768516 strut tower brace 81.31 47.97
22197599 front chassis spring 95.81 54.61
25649664 front stabilizer bar 116.88 66.62
89047690 front strut 122.10 61.05
rear
25668549 rear spring 75.88 43.25
25666234 rear stabilizer bar 114.84 65.46
89047688 rear left absorber 229.50 114.75
89047689 rear right absorber 229.50 114.75
There, I answered my own question.
So here is another one - if someone put all of these components on a SE or SLE would it handle like a GXP??? I would think it would be pretty close.
#5
Senior Member
Posts like a 4 Banger
Join Date: Jul 2003
Location: Staten Island New York
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
I noticed in all these parts the one number missing was the ring that goes around the struts to connect to the strut tower bar. I guess there is a left and right side mount. Can anyone find that part number to complete the set up?
#6
Member
Posts like a V-Tak
Join Date: Nov 2004
Location: Daytona
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
Not sure...
The GXP has Stabiltrak and an air regulated rear suspension. The 18 inch wheels could be replicated but does the SE or SLE have the same drive gear and the same brakes? I'm not sure you would get the same ride and by adding those components you may make the ride more stiff than anything else.
Thread
Thread Starter
Forum
Replies
Last Post
zigger21
Bonneville GXP/ Northstar Powered Cars
21
07-23-2011 07:03 AM
almoniyot
Performance, Brainstorming & Tuning
1
01-25-2006 05:17 PM