Intake for the Aurora
12-27-2003, 01:58 AM
#1
Senior Member
Posts like a Corvette
Thread Starter
Join Date: Jan 2002
Location: Cali
Posts: 1,587
Likes: 0
Received 0 Likes
on
0 Posts
Intake for the Aurora
Domestic Performance is looking for an Aurora with a 4.0L and a 3.5L to make intakes for the Aurora that includes a Cold Air Intake Box.
Contact me at domesticperformance@comcast.net
Ty
Contact me at domesticperformance@comcast.net
Ty
12-27-2003, 05:00 PM
#2
Senior Member
Certified GM nut
Join Date: Jul 2003
Location: Chicagoland
Posts: 1,712
Likes: 0
Received 0 Likes
on
0 Posts
Tell this to the Aurora guys over on the edmunds/townhall Aurora board. I'm sure there looking for a real CAI box. Where do you need the cars to be tested?
12-28-2003, 07:48 PM
#7
Senior Member
Posts like a Corvette
Thread Starter
Join Date: Jan 2002
Location: Cali
Posts: 1,587
Likes: 0
Received 0 Likes
on
0 Posts
Well the headers are still waiting because i was waiting for another company to make them ..It was there idea before mine, and i respect their attempt to make them. That said If it takes longer than February 2004 for the current company who was intending to make them originally then I will have them made. If i get 3-4 people interested now I will go forward with a limited order at $1000.00 for a set.
I have a Nascar engine shop and builder set up to do billet cams and I can order a set today if needed but I am waiting for our computer guy to finish on the Obd2 computer. If you are interested and serious about spending the money i can get you head and cam work done with very serious results. The obd1 computer option is available and we can always do it for the owner of a 1995 Aurora or 93-95 caddy.
We also have custom thermal throttle body spacers available along with a new nitrous fogger system and a few other goodies.. but not posted on the site. For guys like me trapped in California a swap of an Aurora engine into a Bonneville with a 200- hp Nitrous shot is the best bet for a smogable 6-700hp.
We have figured without any power adder we can see at least 400hp out of any of the Northstar engines.
As for our site we will be pulling some of the smaller cars off our site and focusing on the larger sedans. I am putting all my time and energy into the production of product instead of the site. The spring will be when we show off a new site. I will need a 4.0l Aurora in the Fresno area to work with regardless.
Send a phone number to be phoned at and a time and i will be glad to chat. Send e-mail to domesticperformance@comcast.com
Ty
I have a Nascar engine shop and builder set up to do billet cams and I can order a set today if needed but I am waiting for our computer guy to finish on the Obd2 computer. If you are interested and serious about spending the money i can get you head and cam work done with very serious results. The obd1 computer option is available and we can always do it for the owner of a 1995 Aurora or 93-95 caddy.
We also have custom thermal throttle body spacers available along with a new nitrous fogger system and a few other goodies.. but not posted on the site. For guys like me trapped in California a swap of an Aurora engine into a Bonneville with a 200- hp Nitrous shot is the best bet for a smogable 6-700hp.
We have figured without any power adder we can see at least 400hp out of any of the Northstar engines.
As for our site we will be pulling some of the smaller cars off our site and focusing on the larger sedans. I am putting all my time and energy into the production of product instead of the site. The spring will be when we show off a new site. I will need a 4.0l Aurora in the Fresno area to work with regardless.
Send a phone number to be phoned at and a time and i will be glad to chat. Send e-mail to domesticperformance@comcast.com
Ty
Thread
Thread Starter
Forum
Replies
Last Post
markviiisvt4
Performance, Brainstorming & Tuning
10
01-03-2006 11:46 AM
Jim W
Your Ride: GM Pictures & Videos
45
09-15-2003 08:06 PM