An FSM??????Thing is igot detailed instructions on the install and it said nothing about an inline amp and there are no stray wires that would go with the setup..
heres what i was told and its what i did have everything working but sound
To Install it: 1st reach under the dash and look for a silver (looks almost like an amp) box with a wired plug coming out of the bottom. These are all of the wires that go to your factory stereo. after unplugging it you can easily remove the factory stereo.
Remove the silver box, there is only 1 screw holding it in and it is directly on the bottom. After you remove it, there will be a connector on the top of it which will plug into your Wiring Connector that you should have bought earlier. The antenna wire also plugs into the top of this silver box. After all this the factory stereo should be completely un-installed (no cutting of any wires should have been required)
Next you should take off the piece of plastic that contains the center vents and cubby hole. It is easy to pry with the glove box door open. There are 2 bottom clips that are to be pryed out and the top 2 slide out the bottom. Now you can reroute the set of wires and the antenna wire to the new location of the stereo, this may be kind of tough. Take the Wiring connector you bought and the wiring connector that came with the stereo and crimp all the appropriate wires together using splice connectors and a crimping tool...they should be the same color, but check the instructions that came with the cd player and wiring connector to be sure. After that the connections should slide togethor and the cd player should turn on with the key on. The rest you should be able to figure out since it is only mounting the cd player in the new plastic piece which is very straight forward.
2000 Suburban 3" lift and some power mods..The daily
06 impala SS CAI,Exhaust,pirellies the other daily
86 camaro Far from stock......The hot rod
1992 camaro RS 25th anv 350 5 spd..The cruiser