CD Deck Problem
09-14-2010, 04:53 AM
#1
Senior Member
Posts like a Turbo
Thread Starter
Join Date: May 2009
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
CD Deck Problem
About a week ago I started the car and had a misfire which seem to shorten out the deck. I have a pioneer deck and it has not come back on since then. Now, I read that if the battery has been disconnected or the device removed and installed several times it will go into a security lock. I also read to reset the deck I would have to disconnect the deck for 24 hours and then reconnect.
A guy I know that works on car audio stated to me that the deck was fried and the only thing to do is replace the deck. Is there anyway to check the deck to know if it has actually been destroyed?
A guy I know that works on car audio stated to me that the deck was fried and the only thing to do is replace the deck. Is there anyway to check the deck to know if it has actually been destroyed?
09-14-2010, 12:15 PM
#3
Senior Member
True Car Nut
Join Date: Mar 2010
Location: Eaton Rapids MI
Posts: 2,964
Likes: 0
Received 0 Likes
on
0 Posts
Where the harness plugs into the back of the deck there will be a small fuse. That should of popped before any damage was done... check the fuse. Next there should be a very small reset hole u can stick a pen into to reset in.. prolly behind ur faceplate. depress the reset for 10 sec..
09-15-2010, 12:10 AM
#4
Senior Member
Posts like a Turbo
Thread Starter
Join Date: May 2009
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
The fuse on the back on the deck is still good... Now, the guy said the connection from the faceplate to the deck was weak and he used some kind of knife-like-tool and ran it acoss the connection on the back of the face plate it turned on. He said the connection wears out over time and that is a common problem. Now he said the radio will cut on and off because it has worn out and needs to be replaced.
09-15-2010, 12:19 AM
#5
Senior Member
True Car Nut
lol okay i lied to you i had this exact same issue with my jvc deck lol its raptors problem now but i always just pushed in on the faceplate a time or two untill it quit spazzing
09-15-2010, 01:30 AM
#6
Senior Member
Posts like a Turbo
Thread Starter
Join Date: May 2009
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
I got the unit to for a couple seconds... I could not find a reset button anywhere on the deck, I know on my old kenwood there was on in the front... oh well I disconnected the wire hareness from behind the deck and will let it sit for a day...
raptors problem?
raptors problem?
09-15-2010, 01:31 AM
#7
Senior Member
Posts like a Turbo
Thread Starter
Join Date: May 2009
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
how do I go about fixing the faceplate?
09-15-2010, 11:09 AM
#8
Senior Member
True Car Nut
Join Date: Mar 2010
Location: Eaton Rapids MI
Posts: 2,964
Likes: 0
Received 0 Likes
on
0 Posts
U can buy a new faceplate for ur deck.. but ur options are limited if the contact points are worn. The its my problem now because he traded the deck to me. I buy, sell and trade car audio
Thread
Thread Starter
Forum
Replies
Last Post
