No sound from factory speakers
#11
If it were an amp, it would be on the drivers side and say "monsoon" in red on the amp. I have the monsoon amp on the drivers side, and some other box on the passengers side. I don't know when GM moved from the Bose system to the Monsoon system though. Go ahead and take a pic and post it. Pics are always good :^)
#12
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Oct 2009
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
I am not allowed to post pictures yet. One box is and and the other is ALPS rear intigration system. I do not see any cut wires from the drivers seat back to the trunk.
#15
I would take the head unit out, get at the gm07 wiring harness and hook up the remote power on from the aftermarket head unit to the remote power on, on the harness and see if you get sound. If you have the monsoon amp, all you need to do is power it up. And i would use the factory amp. it does all the processing for the factory system. Untill you get a new system, speakers, amps and the like.
#16
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Oct 2009
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
I would take the head unit out, get at the gm07 wiring harness and hook up the remote power on from the aftermarket head unit to the remote power on, on the harness and see if you get sound. If you have the monsoon amp, all you need to do is power it up. And i would use the factory amp. it does all the processing for the factory system. Untill you get a new system, speakers, amps and the like.
I am going to pull the head unit and connect it to an external speaker to double check the unit is not stuck in some kind of ATT mode. I know I should have check this already but figured new is new.
#17
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Oct 2009
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
I hooked an external speaker to the head unit and have sound so not a bad head unit.
I am missing something not sure what. I have nothing that says monsoon that i can see i am getting power from the ribbon.
Any other thoughts to use factory wiring.
Thanks for all the help
I am missing something not sure what. I have nothing that says monsoon that i can see i am getting power from the ribbon.
Any other thoughts to use factory wiring.
Thanks for all the help
Thread
Thread Starter
Forum
Replies
Last Post
GunsOfNavarone
Audio (and aftermarket electronics)
0
11-29-2014 08:20 AM
ComfyCar
Audio (and aftermarket electronics)
10
04-17-2005 08:05 PM
SSEimatt93
Audio (and aftermarket electronics)
2
07-17-2003 01:22 PM
94SSei
Audio (and aftermarket electronics)
15
05-31-2003 08:35 PM