Speaker wiring Question
02-11-2007, 03:20 PM
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Dec 2006
Location: Rialto, California... its near San Bernardino
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Speaker wiring Question
need to know if I can use the stocks in the back which are 10 ohm with some 4 ohm fronts? I have a kenwood 5028 HU and just got the infinity reference 5010cs for the fronts http://www.crutchfield.com/*-phDVzMV...sp?I=1085010CS
heres the radio
http://www.crutchfield.com/*-CHWyKy7...113MP5028&pg=4
heres the radio
http://www.crutchfield.com/*-CHWyKy7...113MP5028&pg=4
02-11-2007, 03:26 PM
#2
Senior Member
True Car Nut
Join Date: Jun 2004
Location: Rochester, NY (college)
Posts: 6,182
Likes: 0
Received 0 Likes
on
0 Posts
If you are asking if you can keep the stock rear speakers with that aftermarket HU and use those speakers for the fronts??
If that is what you are asking, then yes you can.
If that is what you are asking, then yes you can.
02-11-2007, 03:59 PM
#3
Member
Posts like a V-Tak
Thread Starter
Join Date: Dec 2006
Location: Rialto, California... its near San Bernardino
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
yeah I was just concerned if the different Ohmic values would be causing havoc with my radio, its been a long time since my electronics classes
02-11-2007, 04:06 PM
#4
Senior Member
True Car Nut
Join Date: Jun 2004
Location: Rochester, NY (college)
Posts: 6,182
Likes: 0
Received 0 Likes
on
0 Posts
should be fine.
The ratings for the HU are the lowest ohm values that the HU can handle. Since the fronts and rears are on different channels w/in the headunit they wont impact each other.
I run amped 6.5" components for my front stage and the stock 6*9 speakers powered by the headunit for my rear fill. Other than my subs and the music I listen to reaking havoc on the 6*9 speakers they still work to this day.
The ratings for the HU are the lowest ohm values that the HU can handle. Since the fronts and rears are on different channels w/in the headunit they wont impact each other.
I run amped 6.5" components for my front stage and the stock 6*9 speakers powered by the headunit for my rear fill. Other than my subs and the music I listen to reaking havoc on the 6*9 speakers they still work to this day.
Thread
Thread Starter
Forum
Replies
Last Post
Pologuy
2000-2005
2
07-26-2008 06:52 PM
jachin
Audio (and aftermarket electronics)
12
10-31-2003 11:20 PM
toxictelevision
Audio (and aftermarket electronics)
3
03-12-2003 04:29 PM