Pioneer Deck Installation
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Sep 2005
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Pioneer Deck Installation
K, Guys I'm trying to install a Pioneer Deck in my 1993 SSEi and I'm having a little trouble with the wiring, can someone please send me a diagram or at least the colors of the proper wiring.. cause its confusing the **** outta me.
#2
Senior Member
Posts like a Camaro
Join Date: Oct 2003
Location: Hamilton, Ontario
Posts: 1,074
Likes: 0
Received 0 Likes
on
0 Posts
How are you installing the deck? are you using a wiring adaptor? if so then you should just have to match up the colours. unless the original car wiring is screwed up. What kind of audio system does the car have stock? There are some variations.
#4
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Sep 2005
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
It'* got the factory system in it, no mods no nothing so far, I'm just cut and splicing here dude, I just want regular match ups, its got the Cd player and the factory amp in it.
#5
Senior Member
Posts like a Turbo
Join Date: Aug 2005
Posts: 235
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Mortehl
I'm not trying to be sarcastic, get the wiring harness bro. 8.99 and it'll save you SERIOUS heartache.
#6
DINOSAURUS BOOSTUS
Expert Gearhead
Me too...and that'* going to make it about 100 times tougher..
Two ways I can see to solve the problem:
1. Go to the parts store and write down the information on the card in the harness for your car. Wire colors are all the same. As well look at the colors and location of their wires.
2. PM one of the people with your year FSM in the sticky at the top of the 92-99 section for assistance. This option may take longer.
Two ways I can see to solve the problem:
1. Go to the parts store and write down the information on the card in the harness for your car. Wire colors are all the same. As well look at the colors and location of their wires.
2. PM one of the people with your year FSM in the sticky at the top of the 92-99 section for assistance. This option may take longer.
#9
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Sep 2005
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
I bought the Harness and its grounded like it was originally, I figured it out though, Alternator Whine, had to buy a noise supressor for my RCA'* to my amp
#10
DINOSAURUS BOOSTUS
Expert Gearhead
Being a 93 and having bought the harness, I'd guess your gain slider in now inoperable?
You mention adding an amp and I bet you aren't concerned with the gain slider..but if you are:
You need to add a wire to your harness off your amp power on lead to power the gain slider.
You mention adding an amp and I bet you aren't concerned with the gain slider..but if you are:
You need to add a wire to your harness off your amp power on lead to power the gain slider.
Thread
Thread Starter
Forum
Replies
Last Post
Bugsi
Audio (and aftermarket electronics)
8
05-18-2006 02:03 PM
OLBlueEyesBonne
Audio (and aftermarket electronics)
17
01-10-2004 09:38 AM
toxictelevision
Audio (and aftermarket electronics)
9
10-15-2003 11:39 AM