Back in the Dealing game, new stuff
#1
Senior Member
True Car Nut
Thread Starter
Join Date: Mar 2010
Location: Eaton Rapids MI
Posts: 2,964
Likes: 0
Received 0 Likes
on
0 Posts
Back in the Dealing game, new stuff
Just got a few new things..
Traded my Planet Audio VX1400D amp for:
15" Kicker L7 with box
nice big box for 2 10" subs
and a Bandpass Box for 2 12'* (dont knock me it was a freebee, LOL)
and traded my Kenwood KAC-7201 800w amp for:
2 10" Rockford HE'*
The bad:
Got the L7 hom and pulled it out of the box and the spider was pulling away from its seat, someone tried to repair it but it didnt hold, the spider looks pretty shot, my Ex Girlfriends brother showed up and brought his Rockford P400-4 amp with him and offered to trade me for the 15" L7.. i think i might do it! it is a really nice amp.
here is the link to the amp:
http://www.sonicelectronix.com/item_...ch-P400-4.html
and specs:
Punch Series 4-Channel Class AB Car Amplifier
RMS Power Rating:
4 ohms: 50 watts x 4 chan.
2 ohms: 110 watts x 4 chan.
Bridged, 4 ohms: 200 watts x 2 chan.
MOSFET power supply
Remote bass level input (remote level control sold separately)
LED power, thermal, and protect indicators
Tuned Bass EQ (0-18 dB bass boost at 45 Hz or 0-12 dB bass boost at 12 kHz depending on crossover selection)
On-board differential inputs eliminates noise picked up by the signal cable
4/2 channel operation
Integrated Trans•ana technology simplifies the signal path of the amplifier allowing the signal to travel through the amplifier at a lower voltage. The result is greater reliability and exceptional sound quality.
RCA Pass-thru outputs
Featured custom designed TO-247 MOSFETs have 60% more metal tab area providing more power handling capacity, lower impedance and improved heat dissipation over traditional TO-220 MOSFETs found in most competitor'* amps.
Built in NOMAD is a "real time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances.
Cast aluminum heatsink evenly distributes excess heat across entire amplifier heatsink
Nickel-plated RCA level inputs
Nickel-plated screw terminals
Variable high-pass filter (50-500 Hz, 12 dB/octave)
Variable low-pass filter (50-500 Hz, 12 dB/octave)
CEA-2006 compliant amplifier
Frequency response: 20-20000 Hz
Dimensions: 13.02"L x 7.625"W x 2.25"H
4-gauge power and ground leads recommended. Contact us for information regarding a discount on a select amplifier kit when purchased together.
what Do you Think?
Traded my Planet Audio VX1400D amp for:
15" Kicker L7 with box
nice big box for 2 10" subs
and a Bandpass Box for 2 12'* (dont knock me it was a freebee, LOL)
and traded my Kenwood KAC-7201 800w amp for:
2 10" Rockford HE'*
The bad:
Got the L7 hom and pulled it out of the box and the spider was pulling away from its seat, someone tried to repair it but it didnt hold, the spider looks pretty shot, my Ex Girlfriends brother showed up and brought his Rockford P400-4 amp with him and offered to trade me for the 15" L7.. i think i might do it! it is a really nice amp.
here is the link to the amp:
http://www.sonicelectronix.com/item_...ch-P400-4.html
and specs:
Punch Series 4-Channel Class AB Car Amplifier
RMS Power Rating:
4 ohms: 50 watts x 4 chan.
2 ohms: 110 watts x 4 chan.
Bridged, 4 ohms: 200 watts x 2 chan.
MOSFET power supply
Remote bass level input (remote level control sold separately)
LED power, thermal, and protect indicators
Tuned Bass EQ (0-18 dB bass boost at 45 Hz or 0-12 dB bass boost at 12 kHz depending on crossover selection)
On-board differential inputs eliminates noise picked up by the signal cable
4/2 channel operation
Integrated Trans•ana technology simplifies the signal path of the amplifier allowing the signal to travel through the amplifier at a lower voltage. The result is greater reliability and exceptional sound quality.
RCA Pass-thru outputs
Featured custom designed TO-247 MOSFETs have 60% more metal tab area providing more power handling capacity, lower impedance and improved heat dissipation over traditional TO-220 MOSFETs found in most competitor'* amps.
Built in NOMAD is a "real time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances.
Cast aluminum heatsink evenly distributes excess heat across entire amplifier heatsink
Nickel-plated RCA level inputs
Nickel-plated screw terminals
Variable high-pass filter (50-500 Hz, 12 dB/octave)
Variable low-pass filter (50-500 Hz, 12 dB/octave)
CEA-2006 compliant amplifier
Frequency response: 20-20000 Hz
Dimensions: 13.02"L x 7.625"W x 2.25"H
4-gauge power and ground leads recommended. Contact us for information regarding a discount on a select amplifier kit when purchased together.
what Do you Think?
#4
Senior Member
True Car Nut
400 into 2ohms, but 50X4 into 4 thats kinda what i need. could use a little more power but at this point im think im just going to do something like that.
Thread
Thread Starter
Forum
Replies
Last Post
BonneMeMN
Your Ride: GM Pictures & Videos
11
09-20-2004 01:19 AM