Bigger Speakers in door and deck
#1
Senior Member
True Car Nut
Thread Starter
Join Date: Feb 2004
Location: Pennsylvania
Posts: 5,177
Likes: 0
Received 0 Likes
on
0 Posts
Bigger Speakers in door and deck
Are we able to put bigger size speakers in the door and deck? If so, what is a good size to go with?
#3
Senior Member
True Car Nut
Thread Starter
Join Date: Feb 2004
Location: Pennsylvania
Posts: 5,177
Likes: 0
Received 0 Likes
on
0 Posts
I am not sure how big. Sometimes on cardomain I will see some door speakers that are too big, but have them locked in there securely. I was just wondering if anyone here had something like that so I could get an idea maybe
#5
Senior Member
True Car Nut
Thread Starter
Join Date: Feb 2004
Location: Pennsylvania
Posts: 5,177
Likes: 0
Received 0 Likes
on
0 Posts
Hmm, do they get in your way much? Do you still have your door speakers, or do those have to be disconnected for the kick panels to work?
#6
Senior Member
Posts like a Corvette
Yes they can get in the way because the ones im using are big box speakers, however im working on new panels and with the right use of fiberglass stuffing, you can make a smaller box sound bigger.
#7
Senior Member
Posts like a 4 Banger
Join Date: Dec 2002
Location: New Jersey, USA
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
If you go to this thread:
http://www.bonnevilleclub.com/forum/...ic.php?t=17089
You can see where I put new tweeters in my doors, and if you look carefully, there are 6.5" drivers in the doors. I would post more detailed pics, but the images I took from the construction process were on my brother'* camera, which he hasn't been around for a while. Basically, a Dremel tool is all you need.
I've ordered another set of components to install in the rear doors as well. Will post when I get that job done, however my car is in the shop due to a collision, so this may be a while before I can tackle it.
http://www.bonnevilleclub.com/forum/...ic.php?t=17089
You can see where I put new tweeters in my doors, and if you look carefully, there are 6.5" drivers in the doors. I would post more detailed pics, but the images I took from the construction process were on my brother'* camera, which he hasn't been around for a while. Basically, a Dremel tool is all you need.
I've ordered another set of components to install in the rear doors as well. Will post when I get that job done, however my car is in the shop due to a collision, so this may be a while before I can tackle it.
Thread
Thread Starter
Forum
Replies
Last Post
GXP_Vince
Audio (and aftermarket electronics)
5
07-19-2007 07:34 PM
black_friday
Audio (and aftermarket electronics)
3
12-19-2006 12:53 PM