removing the rear deck
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Feb 2006
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
removing the rear deck
im trying to remove the rear deck of a 93 SE and i cant seem to get the back seat out of the way.. any easy way to do that so i can swap out the speakers?
#2
Senior Member
Certified Car Nut
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes
on
0 Posts
Re: removing the rear deck
Originally Posted by DaveSac11789
im trying to remove the rear deck of a 93 SE and i cant seem to get the back seat out of the way.. any easy way to do that so i can swap out the speakers?
pull up on the rear speaker grilles, you will see the speakers, there are 2 clips that hold the plastic spacer and the speaker, pull them up and then replace the speaker....reverse for installation
#6
Senior Member
Certified Car Nut
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by DaveSac11789
am i even going to need a wiring harness for the rear speaks or r the terminals available to unclip and reclip to the new speakers?
the connectors are on the factory speakers, and you cant remove then....if you can wait a few days, i can get you a factory connector and then you dont have to cut your factory wiring
#8
Member
Posts like a V-Tak
Thread Starter
Join Date: Feb 2006
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
thanks anyways i dont need the harnesses.. but i just need to know hwich wire is the pos/neg wire.. because theres a dark blue and light blue and i can just get the terminals on after i no that
#9
Senior Member
Certified Car Nut
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by DaveSac11789
thanks anyways i dont need the harnesses.. but i just need to know hwich wire is the pos/neg wire.. because theres a dark blue and light blue and i can just get the terminals on after i no that
(+) Dk Blu
(-) Lt Blu
LH Rear
(+) Brn
(-) Yel
#10
Member
Posts like a V-Tak
Thread Starter
Join Date: Feb 2006
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
sHyt i think i did them both the opposite way..
is the rule that if u keep it consistent that it wont effect the sound or something.. i forget but just let me know if its a defenite "go" on re-wiring that stuff..
i did dk blue = neg brown=neg
light blue=pos yellow=pos
is the rule that if u keep it consistent that it wont effect the sound or something.. i forget but just let me know if its a defenite "go" on re-wiring that stuff..
i did dk blue = neg brown=neg
light blue=pos yellow=pos