Theftlock question
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Apr 2009
Location: Mass
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
Theftlock question
Do all 2000 up factory Delphi HU'* have to be de/re-coded by a Tech 2 ?
Pick up a used direct fit unit off FleaBay from good source,[with VIN] but don't get any lights on on display only> all buttons light up OK [which is why I was replacing orig unit]> theft light blinks with ket off and steady with key on
Familiar with manual method of retriving code and set up, but dealer says they need the display for Tech2 as well,,, sound right?
TIA
Pick up a used direct fit unit off FleaBay from good source,[with VIN] but don't get any lights on on display only> all buttons light up OK [which is why I was replacing orig unit]> theft light blinks with ket off and steady with key on
Familiar with manual method of retriving code and set up, but dealer says they need the display for Tech2 as well,,, sound right?
TIA
Last edited by GreenLantern; 04-23-2009 at 03:10 PM.
#3
Member
Posts like a V-Tak
Thread Starter
Join Date: Apr 2009
Location: Mass
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
Familiar with the VIN swap
Question is wether you need the Tech 2 recalc first, before the unit works and display lights?
Guessing defective unit with bad display, but double checking to see if others experianced similar "no display" during swap
Question is wether you need the Tech 2 recalc first, before the unit works and display lights?
Guessing defective unit with bad display, but double checking to see if others experianced similar "no display" during swap
Thread
Thread Starter
Forum
Replies
Last Post
Allmachtige
Audio (and aftermarket electronics)
10
07-23-2003 08:47 PM