ZZP tranny done after 14k? (MANY UPDATES, TAKE A LOOK)
#51
Senior Member
Posts like a Turbo
Join Date: Jun 2004
Posts: 287
Likes: 0
Received 0 Likes
on
0 Posts
This probably isn't an option but if you have access to the shop where you took it to have the motor replaced, you could get it towed there, pull the engine / trans yourself and drive it to John, have him rebuild it, and install it back in yourself. Would save you the 300 and just cost you your time.
If you lived closer I'd do it for you but I know that isn't an option. I guess my $2,000 did nothing but buy you another headache :?
I am also curious to find out just what the heck went wrong. Grr. I can't believe just how much this has me ticked off, much more than I thought it would and it isn't even mine anymore! However, in a roundabout way, I'm still paying for that trans right now
If you lived closer I'd do it for you but I know that isn't an option. I guess my $2,000 did nothing but buy you another headache :?
I am also curious to find out just what the heck went wrong. Grr. I can't believe just how much this has me ticked off, much more than I thought it would and it isn't even mine anymore! However, in a roundabout way, I'm still paying for that trans right now
#52
BANNED
Thread Starter
Join Date: Mar 2004
Location: Purgatory
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
gordy: no time constraits... anytime on saturday is fine... why dont u plan on being here like 10 or 11 if thats not to early for ya
adam:
that shop that we did the motor at was my dads, keyword: WAS. he has a new job in brookings, SD... and that is way further than the cities... the whole reason he is not involved anymore is cuz of distance...
john talked to zoomer and steve today to figure out the parts... and then i heard nothing until this evening when zoomer said he will probably get the parts in tomorrow and ship them overnight to me.. so we can still plan for the weekend
adam:
that shop that we did the motor at was my dads, keyword: WAS. he has a new job in brookings, SD... and that is way further than the cities... the whole reason he is not involved anymore is cuz of distance...
john talked to zoomer and steve today to figure out the parts... and then i heard nothing until this evening when zoomer said he will probably get the parts in tomorrow and ship them overnight to me.. so we can still plan for the weekend
#53
Originally Posted by harofreak00
gordy: no time constraits... anytime on saturday is fine... why dont u plan on being here like 10 or 11 if thats not to early for ya
#54
BANNED
Thread Starter
Join Date: Mar 2004
Location: Purgatory
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SSEi95
Originally Posted by harofreak00
gordy: no time constraits... anytime on saturday is fine... why dont u plan on being here like 10 or 11 if thats not to early for ya
#59
BANNED
Thread Starter
Join Date: Mar 2004
Location: Purgatory
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
sigh... i dont even feel like uploading pics right now
just got a call from john... diff is gone... retaining pin in broke in half sitting in the pan
filter is full of metal, either clutch material or TC...
john has a 40k diff for me for $250...
i am now looking at:
$75 tow
$90 for parts from zzp with shipping
$300 R % R
$150 rebuild
$250 diff
total:$865
just got a call from john... diff is gone... retaining pin in broke in half sitting in the pan
filter is full of metal, either clutch material or TC...
john has a 40k diff for me for $250...
i am now looking at:
$75 tow
$90 for parts from zzp with shipping
$300 R % R
$150 rebuild
$250 diff
total:$865
#60
BANNED
Thread Starter
Join Date: Mar 2004
Location: Purgatory
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
another call... tranny filter was PACKED with huge metal shavings... he thinks that this process we are doign right now might not even be enough...
used is gonna be tough... none in MN
calling Ed Morad right now
zooomer wont answer his phone..........
used is gonna be tough... none in MN
calling Ed Morad right now
zooomer wont answer his phone..........