01 SSEI power steering problem
06-01-2010, 03:11 PM
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Jun 2008
Location: woodstock ga
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
01 SSEI power steering problem
I have an 01 ssei. Last night went to crank the car and low and behold no power steering at all. It was fine when parked but now it is completely inop. I am assuming the pump has died since fluid level is perfect and the belt is ok. Are there any tricks I need to know about before I attempt to change this pump? I think I have determined there are 2 mounting bolts behind the pulley, one at 12 and one at 6 oclock that you loosen through the holes in the pully. Any help or suggestions would be greatly appreciated.
06-01-2010, 03:33 PM
#2
Retired Senior Admin
Expert Gearhead
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
That is correct. You will need to remove the 2 hoses as well. Be careful not to drop the pump as the oil pressure sensor is right below it.
Thread
Thread Starter
Forum
Replies
Last Post
Pologuy
2000-2005
21
02-20-2015 09:55 PM
options13
Everything Electrical & Electronic
11
08-13-2006 01:42 PM