abs and traction lights
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Nov 2008
Location: rice lake
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
abs and traction lights
i got my 2000 ssei about three months ago and i love it dearly. i got it knowing there were a few problems with it, one being the abs and traction control lights were on an it says service stability system. so i figured it was the wheel speed sensors going bad because i knew it needed wheel bearings. i replace both wheel bearings and to my surprise it didn't fix the problem. what stumps me is that a few weeks ago before i replaced the wheel bearings we got a lot of snow, and the entire night my trac control worked and my abs worked wonderful. but only for the one snowy night.
any help is appreciated
any help is appreciated
#3
Member
Posts like a V-Tak
Thread Starter
Join Date: Nov 2008
Location: rice lake
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
yeah its right at the top thats the first thing i checked. i also tried disconnecting the battery for a few mins to clear the code but it didn't work either
#7
They can be. The only true way of knowing is to have the dealer use a Tech II on it, and that'll tell you what the problem is. Problem is finding a dealer who doesn't charge an arm and a leg to spend 15 minutes scanning it.
#9
Member
Posts like a V-Tak
Thread Starter
Join Date: Nov 2008
Location: rice lake
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
i ran the scan tool on the bonneville the other day and i got a trouble code of LF wheel speed sensor bad or short. so i'm gonna check out the wires for shorts