Wheel Bearing differences on a 2001 Bonne
#1
Wheel Bearing differences on a 2001 Bonne
What is the difference between the 1st design and 2nd design on the front wheel hubs on the 2001? How do I know which one I need?
#2
Senior Member
True Car Nut
If I remember correctly the design different involved the internal races on the bearings. Order up some new Timken'* and you'll be fine. I would recommend that you change both and not just one. If one has gone bad, the next one will soon be there.
#4
Senior Member
True Car Nut
The second design for anything is usually an improvement from the 1st design, I'll go out on a limb here and say YES...the 2nd design is better, especially if it involved changing the races in the bearing.
If you're going to have one old and one new wheel hub on the car, that'* not an issue. If one is the 1st or 2nd design...that should also not be an issue. However; as I stated earlier...I woud recommend you replace then both at the same time.
Also, please add your year and trim of your vehicle to your signature line. That way when you start asking questions in other areas of the forum, we all have a better idea on how to assist you. Click on "Quick Links" above, go down to "User Control Panel" and then click on "Edit your Signature" It'* pretty straight forward from there.
If you're going to have one old and one new wheel hub on the car, that'* not an issue. If one is the 1st or 2nd design...that should also not be an issue. However; as I stated earlier...I woud recommend you replace then both at the same time.
Also, please add your year and trim of your vehicle to your signature line. That way when you start asking questions in other areas of the forum, we all have a better idea on how to assist you. Click on "Quick Links" above, go down to "User Control Panel" and then click on "Edit your Signature" It'* pretty straight forward from there.
#6
DINOSAURUS BOOSTUS
Expert Gearhead
Yes...a second design is made to interchange and TMK they didn't change the knuckle from 00-05, you should be ok to use either w/o issues.
Thread
Thread Starter
Forum
Replies
Last Post