boost always reads 0
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Jun 2006
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
boost always reads 0
my boost always reads 0? I have read it is the boost control selenoid? If this is correct what is the part # . I also need the part # for the throttle pos. sensor and the best place to buy them thnks
2000 ssei
2000 ssei
#4
Senior Member
True Car Nut
Join Date: Sep 2004
Location: Fitchburg Ma _ToastedRice_
Posts: 6,837
Likes: 0
Received 0 Likes
on
0 Posts
do you have boost? or is just the guage reading inaccurately? If you really have 0psi of boost, the car would be very sluggish, and downright slow.
#7
Member
Posts like a V-Tak
Thread Starter
Join Date: Jun 2006
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
thats where it goes there was already a hose there but after poontiac gave me a diagram it showed that a T was supposed to be there and I was missing the T so it didnt appear that there was a nipple for it. thnks again for the help
Thread
Thread Starter
Forum
Replies
Last Post
Toddster
Trouble shooting + Test Procedures
0
03-21-2009 06:24 PM